READY TO WORK, WHEN YOU NEED IT

L&M Radiator has been a global leader in the fabrication of air-to-air and air-to-oil coolers for decades, and we’ve supplied solutions for industry-wide applications.

AIR-TO-AIR AND AIR-TO-OIL COOLERS

S FIN COOLERS

FOR HYDRAULIC AND COMPRESSOR OIL/AIR COOLING

 PRESSURES: up to 600psi (4137 kPa)

S fin coolers are comprised of a single row of multi-ported high efficiency aluminum cooling tubes. The seal between the tube and header is held captive in header by a special process. Once a tube is in place, the seal is compressed to make a seal capable of withstanding the application specific pressures. MESABI® S fin charge air coolers and oil to air coolers can be designed to customer’s specifications.

  • FLEXIBLE CORE DESIGN
    Individual cooling tubes held in headers with flexible rubber seals to absorb mechanical and thermal stresses that can cause conventional cores to leak
  • FIELD REPAIRABLE
    Seals allow any damaged tubes to be removed and replaced in the field using simple hand tools and often without removing the cooler from equipment
  • EASY TO CLEAN
    Clean with high-pressure air or water

CSC™ HIGH PRESSURE COOLERS

FOR HYDRAULIC AND COMPRESSOR OIL/AIR COOLING

PRESSURES: up to 500 psi (3447 kPa)

Captured Seal Cooler™ coolers feature tube-to-header seals held captive in the header plate. Once a tube is in place, the seal is compressed to make a tube-to-header seal capable of withstanding tested pressures.

  • FLEXIBLE CORE DESIGN
    Individual cooling tubes held in headers with flexible rubber seals to absorb mechanical and thermal stresses that can cause conventional cores to leak
  • FIELD REPAIRABLE
    Seals allow any damaged tubes to be removed and replaced in the field using simple hand tools and often without removing the cooler from equipment
  • EASY TO CLEAN
    Clean with high-pressure air or water

ALUMINUM TUBE COOLERS

FOR HYDRAULIC AND COMPRESSOR OIL/AIR COOLING

PRESSURES: up to 175 psi (1207 kPa)

Standard aluminum tube coolers feature tubes with integral circular finning rolled from the tube wall. Turbulators are placed in tubes to increase heat transfer and are removable for cleaning.

  • FLEXIBLE CORE DESIGN
    Individual cooling tubes held in headers with flexible rubber seals to absorb mechanical and thermal stresses that can cause conventional cores to leak
  • FIELD REPAIRABLE
    Seals allow any damaged tubes to be removed and replaced in the field using simple hand tools and often without removing the cooler from equipment
  • EASY TO CLEAN
    Clean with high-pressure air or water

COPPER TUBE COOLERS

FOR HYDRAULIC AND COMPRESSOR OIL/AIR COOLING

PRESSURES: up to 150 psi (1034 kPa)

Copper tube coolers are similar in design to MESABI® engine radiators, but have internal turbulators. Designed for those applications where high efficiency is required and space available is limited.

  • FLEXIBLE CORE DESIGN
    Individual cooling tubes held in headers with flexible rubber seals to absorb mechanical and thermal stresses that can cause conventional cores to leak
  • FIELD REPAIRABLE
    Seals allow any damaged tubes to be removed and replaced in the field using simple hand tools and often without removing the cooler from equipment
  • EASY TO CLEAN
    Clean with high-pressure air or water

WARRANTY

The L&M Radiator Warranty consists of the L&M Radiator General Warranty and the L&M Product Specific Warranty.